---

Clear the site of existing debris such as sod and rocks and then level ground. A minimum depth of 80mm crushed rock should then be spread as evenly as possible and compacted using a vibratory compactor ,  a 20mm layer of crusher dust is then added and compact again. Allow a fall for excess water to penetrate through the turf and drain. When compacting continue to add water. This will create a firm base.

---

Grass is then rolled out over prepared base.

---

Joining tape is used where two pieces of artificial turf require joining together. The joining tape must be cut for the length of the join and placed under the proposed join. Once the joining tape is applied the synthetic grass can be joined in a hidden and seamless manner.Joining tape comes in 10mt & 5mt rolls.

---

Grass can be easily trimmed with a Stanley knife or similar.

---

Turf pegs  are used to secure the synthetic grass to the ground. It is recommended that the turf pegs  be placed approximately 1 per meter around the perimeter and along  joins where required.

---

Sand comes in 25kg bags. We recommend applying 6kg of sand per square meter of artificial turf.The sand provides the foundation for the synthetic grass,  withstanding normal traffic as well as giving the grass the spring to come upright after being walked upon by people and animals.